POST/SPARES Savant SmartAudio Matrix Switch (SSA-3220D)

This item has been power on tested and NO outputs have also been tested.

Item Condition 

• General wear and tear
• Chassis has scuffs and scratches
• Come with NO accessories

Item Specification:

• Temperature - 32° to 104° F (0° to 40° C)
• Humidity - 10% to 80% Relative Humidity (non-condensing)
• Cooling - 5 cubic feet per minute (CFM) recommended.
• Maximum BTU - 105 BTU/hour
• Height - 3.46 in / 8.79 cm
• Width - 17.3 in / 43.94 cm
• Depth - 12.94 in / 32.88 cm
• Weight - 14.25 lb / 6.5 kg
• Rack Space - 2U
• Input Power - 100-240V AC, 50/60 Hz, 1.5 Amp; Uses standard three prong IEC C14 connector
• Nominal Power - 25 watt
• Maximum Power - 40 watt
• Total Harmonic Distortion (THD) - <0.004 %, 20 Hz - 20 KHz
• Dynamic Range - 100 dB, A-weighted
• Signal-to-Noise Ratio (SNR) - >100 dB, A-weighted
• Frequency Response - 20 Hz-20 kHz (over this range it does not vary more than +/- 1.5dB)
• Input Impedance - 12 K Ohms
• Volume Control per Channel - +10 dB to -117 dB in 0.5 dB steps
• Trim: -10dB to +10dB on every configured audio input
• Mute - Individual output channel mute when in processed mode.
• Mono - Configurable on every output pair. Each channel will output the combined input signal.
• Seven-Band Equalizer (EQ) - On a per channel basis; +/- 12 dB, 0.5 dB steps
• Supported Sample Rates - 44.1 kHz | 48 kHz | 96 kHz —all at 16-bit or 24-bit resolution
• Output Delay Each Channel - Adjustable from 0 to 85ms
• Analog Output Voltage - 2V RMS / 5V max